Organometallics

By James Ashenhurst

Synthesis Problems Involving Grignard Reagents

Last updated: July 6th, 2023 |

Grignard Practice Problems: Synthesis Exercises Involving Grignard Reagents

  • Grignard reagents add once to aldehydes to give secondary alcohols and also add once to ketones to give tertiary alcohols.
  • Esters react twice with Grignard reagents to give tertiary alcohols which contain two identical R groups.

So when working backwards in a synthesis problem involving Grignard reagents:

  • Secondary alcohols can be produced two possible ways, depending on which C-C bond is formed by the Grignard reagent.
  • Tertiary alcohols containing three different R groups can be produced in three possible ways, via three possible ketone precursors
  • Tertiary alcohols where at least two groups are the same can be produced from an ester in only one way – the two groups that are the same will originate as Grignard reagents, and the other R group will be a part of the ester.

summary for planning synthesis of alcohols from aldehydes ketones and esters

Table of Contents

  1. Solving Synthesis Problems Involving Grignard Reagents
  2. Three Key Reactions of Grignard Reagents
  3. Problem 1: Learning To Think In Reverse
  4. Problem 2:
  5. What About Esters? (And Problem 3)
  6. Summary: Grignard Practice Problems
  7. Notes
  8. Test Yourself!

1. Solving Synthesis Problems Involving Grignard Reagents

Now that we’ve covered some of the most important reactions of Grignard reagents, it’s time to actually apply this knowledge to practical matters. And by practical matters, I mean synthesis. 

After all, the point of learning each of the reactions in organic chemistry is that they’re useful tools for forging and breaking certain bonds. Just like a carpenter might use a hammer, nails, screwdrivers and various saws to build a table, organic chemists apply the “tools” of organic reactions toward some kind of goal – building a molecule from simpler components, for example.

A skilled carpenter can imagine a finished table and then think backwards to what tools to use to build it from simpler parts. Similarly, organic chemists must be able to envision how a complex molecule can be made through a sequence of  reactions.

In this post, we’ll  go through three exercises that show how we can “think backwards” from the product of a Grignard reaction to its starting materials.

So let’s get started!

example grignard synthesis how would you synthesize using Grignard

How do we answer a question like this?

Break it down into parts, of course! We’ll tackle A, B, and C in turn.

Here’s our plan.

First, we’ll look at what we know about Grignards in the forward direction, and then use that information to work backwards. To take a simple example, if you know that 3 + 4 = 7, then you can work backwards to figure out what number must be subtracted from 7 to give you 3.  It’s the same idea, as we’ll see.

2. Three Key Reactions of Grignard Reagents

Here’s three key reactions of Grignards we learned in a previous post: addition to aldehydes, addition to ketones, and addition to esters.

three key reactions of grignard reagents addition to aldehydes ketones and esters

Note that in each case we’re forming C-C and breaking C-O  as well as forming O-H. In the case of the ester, the Grignard actually adds twice – a point that’s important for planning, as we’ll see.

3. Problem 1: Learning To Work “In Reverse”

Let’s look at the first molecule,  2-pentanol.

working backwards from pentan-2-ol to consider how to synthesize using a grignard reagent

Let’s start with the obvious. It’s a secondary alcohol, as the carbon attached to OH is in turn attached to two other carbons. Looking at our list of three reactions above, we know that secondary alcohols can be made through the addition of Grignard reagents to aldehydes.

general pattern for a grignard reaction making a secondary alcohol goes back to grignard plus aldehyde

Again, note that we form C-C and O-H, and break C-O (π).

Now let’s ask: what if we were to wave a magic wand, and make this reaction act in reverse? What bonds would form and break?

We’d be breaking C-C and O-H, and forming C-O (π). Since this isn’t a “real” reaction, we use a special open-ended arrow called a “retrosynthesis arrow” to show that this is a “planned” reaction rather than an actual one.

imagining a grignard reaction in reverse from a secondary alcohol going to an aldehyde plus grignard reagent

Getting back to that earlier comment about subtraction: if you know that

5 + 8 = 13

and are then asked “what number must be removed from 13 to give 5 ?”

you’d just have rearrange the equation like this:

5 = 13 -8

Of course, you’re very familiar with subtraction by now, but your 1st grade self probably started by thinking it was tricky. Likewise, working backwards in the context of chemical reactions is a new thing for many people. It takes practice to apply!

Getting back to 2-pentanol: as you might have noticed, there’s actually 2 ways to go about looking at this reaction in the reverse reaction, since there are two different C-C bonds (let’s call A and B) that we could break to give an aldehyde and a Grignard.

two potentially different syntheses of a secondary alcohol using a grignard reaction with an aldehyde

  • Breaking bond A (retrosynthetically) gives us butanal and methyl Grignard.
  • Breaking bond B (retrosynthetically) gives us ethanal and propyl Grignard.

There’s no wrong answer here: they’re actually equally good.

After each Grignard reaction we need to do a mildly acidic workup so that we end up with the neutral alcohol. So in the forward direction we can go:

once the grignard is planned in the reverse direction now plan grignard plus aldehyde in the forward direction

[See that I switched something around there: I made the second Grignard derived from Cl instead of Br . Whether your Grignard is Cl, Br, or I doesn’t matter – they all work fine].

4. Problem 2:

Ready for another one? Let’s look at B.

planning synthesis of tertiary alcohol through grignard reaction

The first observation to make here is that the C attached to OH is itself attached to 3 carbons, so it’s a tertiary alcohol. 

Going back to what we saw about the reactions of Grignards, we can suppose that this might be made through the reaction of a ketone with a Grignard reagent.

working backwards from a tertiary alcohol to ketone and grignard reagent

In the previous case, there were 2 different ways to make 2-pentanol. Here, there are three, because we could either break bonds A, B, or C in the “reverse” direction to give us one of 3 different combinations of ketone and Grignard reagent.

three different pathways to synthesize tertiary alcohol from grignard and various ketones

All are equally OK! Just for clarity, let’s look at each of them in the forward direction.

forward direction planning synthesis of tertiary alcohol from grignard reaction with various ketones

Again, I mixed up the halides with the Grignards here, just for variety. You might also see many different (equivalent) workup conditions for Grignard reactions.

As long as they result in protonating the intermediate alkoxide to give the alcohol, they’re fine. 

5. What About Esters? (And Problem 3)

Now you might be asking: reactions of Grignards with esters also gives tertiary alcohols. Why can’t we use this here?

tertiary alcohol with two identical r groups is a good occasion to plan grignard with ester

The problem is that there are 3 different R groups on the tertiary alcohol. Recall that Grignards add twice to esters. Therefore, if we were to plan to use a Grignard reaction with an ester to make a tertiary alcohol, we’d need at least 2 identical R groups to be present. The bottom of the image gives some examples.

grignard reagents add twice to esters so it must be a situation where there are two identical r groups

That bottom example also happens to be a good answer to question C, by the way.

C can be made through either addition of cyclohexyl Grignard to an ester, or by 2 different combinations of ketones and Grignard reagents. Can you find them? Answer below [Note 1].

That’s one of the interesting things about synthesis – there are often many different ways to go about solving the same problem. In that respect, it’s also a bit like carpentry: even two different carpenters building the same table might use a slightly different sequence of events to make the same thing.

In introductory organic, we don’t get too picky about whether you pick the most efficient synthesis of a molecule. The key is just being able to get there.

6. Summary: Grignard Practice Problems

The key takeaway for this post is to get in the habit of looking at reactions in the backwards direction as well as in the forward direction. If you know the bonds that form and break in the forward direction, you can apply the reverse to “retrosynthetically” work backwards to its starting materials.

This is yet another reason why I harp on “what bonds form, what bonds break?” as the most important question you should ask yourself when you learn a new reaction.

In the next post we’ll look at a few more Grignard synthesis problems, but throw in a new twist – a reaction of alcohols we’ve already learned about called  oxidation. This will allow us to build up even more complex products from simpler precursors using the Grignard reaction.

Next Post: Grignard Reactions and Synthesis (2) 


Notes

Note 1.  The answer to how to make C from the reaction of a ketone with a Grignard reagent.

answer for how to make tertiary alcohol from a ketone with a grignard reagent


Test Yourself!

Click to Flip

Click to Flip

Click to Flip

Click to Flip

Comments

Comment section

14 thoughts on “Synthesis Problems Involving Grignard Reagents

  1. Thanks alot you really help me but my question is having a skeletal structure like this one

    /+\/\// having a carbonation how can one predict the nucleophile,electrophile and curved arrows to show the attack of the nucleophile on the electrophile

  2. hello sir.
    in case of esters when the RO- group leaves, a carbocation is formed and thereafter oxygen donates it’s LP and we get a ketone. My question is if carbocation rearrangement will be possible?

    1. No carbocation is formed. The new C-O pi bond forms at the same time as the C-O single bond breaks. This mechanism is known as “elimination” or sometimes 1,2-elimination.

      No carbocation rearrangement occurs because there is no carbocation.

  3. Is -NHBoc compatible with grignard reagent? I am trying to make a grignard reagent bearing -NHBoc but turned unsuccessful. And I didn’t find similar examples from reaxys.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.